Halo 5 Water Filter in San Diego

The Halo 5 is a whole house water filter that goes on your main water line, so every faucet, shower and appliance gets treated water. In a San Diego home it does one job very well: it takes out the chloramine taste and smell the City uses to disinfect its water. It also catches sediment from older pipes and works to keep scale from sticking. What it doesn’t do is make hard water soft, so know that before you buy. We install the Halo 5 in homes across San Diego, Monday to Friday. Below is what it does, what your house needs first, and how it compares with a salt softener.

What’s Inside the Tank

One tank holds four layers of filter media, plus a fifth stage mounted on the outlet:

  • Granular activated carbon, which takes out chlorine and chloramine, the source of that pool smell in a glass of tap water.
  • Catalytic carbon, a second carbon layer aimed at chloramine.
  • Filter-AG Plus, a fine media that traps particles down to about 5 microns.
  • Garnet, a dense layer that catches heavier sediment and grit.
  • The Halo ION, an inline unit with magnets that Halo says keeps hardness minerals suspended so they don’t form scale.

Halo builds the system in several sizes, matched to your main line and the size of your household:

Model

Main line size

Tank size (in.)

Height and weight

Rated capacity

H5-100

1 in.

10 x 54

61 in., 93 lb

1,000,000 gallons

H5-125

1.25 in.

12 x 52

59 in., 121 lb

1,500,000 gallons

H5-150

1.5 in.

13 x 54

73 in., 148 lb

2,000,000 gallons

Halo bases those capacities on household size over ten years, so the media is meant to last for years, not months.

What Changes in Your Water, and What Doesn’t

Taste and smell change right away. The City of San Diego disinfects with chloramine, and the carbon layers remove it. It’s the change you notice first, in a glass from the kitchen tap.

Sediment drops. The fine media and garnet catch grit and the flakes that older pipes shed, which is easier on faucet aerators and appliance screens.

Hardness stays. The City’s 2025 water quality report shows hardness averaging about 14 grains per gallon. The Halo ION doesn’t remove calcium and magnesium. Halo says its magnetic field keeps those minerals in suspension so less scale forms, and that existing scale softens over time. Your water will still test as hard, and you may still see spots on glass. Halo notes that mineral deposits become noticeable above about 20 grains, so City water sits below that mark.

One more point, because it often gets blurred in sales talk. The Halo 5 is certified by the Water Quality Association for material safety and lead-free construction. Halo itself states that the system is not WQA tested or certified for contaminant reduction or performance. It’s a filter for taste, smell and sediment, not a treatment you should count on for a specific contaminant.

Is Your House Ready for One?

Most of what makes a Halo 5 install easy or hard is decided before the tank arrives. Check these five things:

  1. A spot on the main, after the pressure regulator. The system has to catch all the water before it splits into hot and cold, so it goes on the main line, usually in the garage near where the line enters the house. Halo’s manual says it goes downstream of the pressure regulator. A dry, level spot that never freezes is best; San Diego’s climate also allows a protected outdoor install.
  2. Pressure between 25 and 80 psi. Halo recommends about 60 psi. A house reading over 80 needs its regulator fixed first, which code calls for anyway. The test is explained on our pressure regulator installation page.
  3. A drain. The system rinses its own media bed on a schedule, and that rinse water has to go somewhere. The control valve has a 3/4-inch drain connection that has to run to a legal drain point, such as a laundry sink or floor drain.
  4. A plain outlet. The valve plugs into a standard 120-volt outlet that isn’t on a wall switch. Its cord is about 15 feet long.
  5. Room for the tank. The smallest model stands about five feet tall and the largest about six, plus space for the bypass valves and a new hose bib on the outlet side.

If your home has a hot water recirculating pump, tell us before the quote. Halo recommends a second ION unit on the recirculation loop, because water that circulates without being used can build scale over time. Halo also designs the system for City water; a home on a private well needs a water analysis first.

Halo 5 or a Salt Softener?

A salt softener actually removes hardness by swapping calcium and magnesium for sodium. It does more against spotting and scale than the Halo 5, but it needs salt refills and sends brine down the drain, and it doesn’t touch chloramine on its own. The Halo 5 adds nothing to the water, needs no salt, and handles taste and smell. If chloramine and sediment bother you most and you want a system you rarely think about, the Halo 5 fits. If hard-water spots on glass and fixtures are the main complaint, a softener does that job better. Our whole home water filtration page compares the wider range of systems.

Installation Day

Whole house filters look simple on paper, and the details are where installs go wrong. On one job the tank head arrived without a bypass valve, so our crew built a bypass into the home’s copper lines before the filter went in. Without it, every future service would have meant shutting off water to the whole house. Here’s how the day runs:

  1. We shut off the main, drain the line and cut in the bypass valves, adapters, a ball valve and a hose bib on the outlet side.
  2. The tank fills slowly with the bypass closed while we check every joint for leaks.
  3. We flush the system through the hose bib, force a regeneration, and repeat, as Halo’s guide calls for. Then every fixture in the house runs for a couple of minutes. Skip this and the first week of water can come out cloudy or gray with carbon dust.
  4. When the water runs clear, we test for chlorine at the hose bib and at the kitchen sink, and show you the result.

A straightforward garage install takes a few hours. Filtration often goes in alongside other work, too. We’ve installed a whole house filter as part of a full hot and cold repipe with a new circulator pump, keeping water running to parts of the house through most of that job. We’ve also replaced an old whole house filter on the same visit as a new water heater.

Halo 5 Maintenance

There are no cartridges to change. The system rinses its media on its own schedule, with each rinse taking about ten minutes. Halo’s guide sets the interval by household size, from every 11 days for one person to every 7 days for four or more. The control valve does need power, so after a long outage, check that the clock and schedule are still right. We service the systems we install.

To ask about a Halo 5 for your home, call (858) 567-0544 during weekday business hours, 8 AM to 5 PM. If you know your main line size or can send a photo of where the line enters the house, use our Contact Us form and we’ll take it from there. Courtesy Plumbing holds California license CSLB #910268, and Tony Misleh, who founded it and is its master plumber, has run it since 2007.

Contact Us

    For Same-Day
    Water Heater Service,
    Call Us On

    (858) 567-0544

    Check Out Our Ratings!